Djanim Interieur Ontwerp & Architectuur

Studio Djanim — interieurontwerp en 3D-visualisatie in AmstelveenStudio Djanim — interior design and 3D visualisation in Amstelveen

telefoon +31 (0)20 30 14 064

Startbaan 6, 1185 XR Amstelveen

Ma t/m za 07:30 - 18:00

Top

Project book · Villa Ronde Hoep

Project book: interior design for villa Ronde Hoep

A detached house on the Ronde Hoep, designed as one whole: floor plan, light, materials and custom work, right down to the brand of the door handle. Below you can see what is in the project book the contractor receives.

Book an appointment

The brief

A two-storey house with three bathrooms, generous terraces and a strong connection to the open landscape of the Ronde Hoep. The question was not to choose a style, but to treat inside and outside as one design: the same calm in the materials, the same logic in the lighting, and a floor plan that truly uses the view rather than just looking out at it.

Light as the first decision, not the last

In this project the lighting plan was decided before the finishes and drawn per floor at a scale of 1:100. Six types of light fitting were used, each with its own task:

  • Maretti Verona recessed spots in white for the base level (72)
  • Maretti Kodiak in bronze for accent and atmosphere (23)
  • Pendants and surface-mounted spots above the dining table and staircase (13 positions)
  • Lightinova BOXX LED wall lights in champagne for the façade and terraces (15)
  • Sensor-controlled floor-level lights for night-time walking routes (9)
  • Garden lighting, included in the concept together with the cabling to the fence and gate

Because this was fixed before the electrician started, every light point is in the right place, on the right circuit and on the right switch. That is exactly the phase in which most costly mistakes are prevented.

Interior materials

The base is kept calm and the contrast lives in the details. A poured floor runs through 198 m² on the ground floor and 61 m² on the first floor; the bedrooms have 46 m² of walnut. The walls use three Farrow & Ball colours: Wevet, Cornforth White and Dove Tail. Skirting boards are 90 mm Swedish skirting in RAL 9016 satin. Curtains are double: blackout in grey, and in-between curtains in sand.

Three bathrooms, three characters

All three bathrooms are drawn at 1:20, wall by wall, with dimensions to the millimetre. The base is always the same wall and floor tile, Atlas Concorde Boost Natural Kaolin, complemented by an accent tile and moisture-resistant paint. The difference is in the metal: the first bathroom is entirely in bronze, including the surface-mounted tap, shower, shower niche and towel radiator. The second uses brushed stainless steel by COCOON, a custom oak washbasin shelf, a countertop basin in Slate and smoked glass with illuminated niches. The third is the calmest: brushed stainless steel, a ceramic countertop basin and clear glass.

Exterior materials

The exterior is part of the same document: 90×90 cm ceramic terrace tiles, Bamboo X-treme façade cladding, a zinc roof, sedum on the flat section, aluminium window frames and frameless glass balustrades, so the view of the polder stays unobstructed.

Right down to the hardware

A project book is only finished when nothing is left to guess. For the doors that meant: ten Skantrae DKS 280 flush interior doors of 93 x 231.5 cm, two glass interior doors with a 40 mm profile, and the same door handle throughout: Weijntjes Milaan in bronze, 19 mm on a 135 mm sprung rose.

Why this works

Because every choice is on paper before anything is ordered. The contractor doesn’t have to interpret, the installer doesn’t have to improvise, and the client sees the result in advance in photorealistic 3D in our presentation room in Amstelveen. What gets built is what was designed.

Frequently asked questions

What exactly is in a Studio Djanim project book?

Dimensioned floor plans per floor, elevations, a lighting plan with the type and number of fittings per room, detailed wall elevations of each bathroom at 1:20, a list of interior and exterior materials with brand and type, a door and hardware schedule, and the square metres per floor finish. Your contractor, installers and suppliers all work from the same document.

Why are lights numbered in a lighting plan?

Because a home rarely works with a single type of lighting. This project used six types of fitting, each with its own function and quantity. By numbering them and drawing them on the floor plan, the electrician knows exactly where each fitting goes, on which circuit and on which switch. That prevents cutting into walls afterwards.

Do you also choose the exterior materials?

In this project, yes. Terrace tiles, façade cladding, roof finish, balustrades and outdoor lighting were chosen together with the interior, in consultation with the architect. Inside and outside belong together; if you design them separately, it shows.

Can I get a design at this level for an existing house?

Yes. Most Studio Djanim projects are existing houses that are being fully renovated. The project book is set up the same way; it simply starts with a survey of what is already there.

A project book like this for your home?

Studio Djanim works this way for houses and villas in Amstelveen, Ouderkerk aan de Amstel, Abcoude and the rest of the region. Call +31 (0)20 30 14 064 or email info@djanim.nl. See also how much an interior designer costs and our frequently asked questions.

Book an appointment